How Much Does a Fence Cost in Fort Worth, TX? The Complete 2027 Fence Buying Guide

If you're planning a new fence in Fort Worth, one of your first questions is probably:

How much is this going to cost?

It sounds like a simple question.

It isn't.

Two Fort Worth homes can need the same 150 feet of fencing and receive dramatically different proposals because fence price depends on far more than linear footage.

Material matters.

Height matters.

The number and size of gates matter.

The condition of the existing fence matters.

Post construction matters.

The grade of the property matters.

Access to the backyard matters.

And the difference between a basic wood privacy fence and a custom cedar fence with steel posts, board-on-board construction, trim, stain and an automatic driveway gate can be substantial.

That's why Rollins Fence Company created this guide.

Our goal isn't simply to give Fort Worth homeowners another generic fence-cost calculator. It's to explain what you're actually paying for, what decisions have the largest impact on cost and how to compare fence proposals without accidentally choosing an inferior project because one number looked cheaper.

If you're considering a new residential fence, custom fence, commercial fence or driveway gate in Fort Worth or surrounding DFW communities, this is what you should know before requesting bids.

Quick Answer:

How Much Does Fence Installation Cost in Fort Worth?

There is no responsible single price-per-foot number that applies to every Fort Worth fence.

Current local pricing guides show significant differences depending on material, height and construction. Published Fort Worth estimates generally place installed wood privacy fencing in a broad range, with cedar, board-on-board construction, taller fences, custom gates and ornamental metal typically requiring more investment.

Those numbers should be used for budget planning only.

A legitimate project price needs to account for:

• Total linear footage
• Fence material
• Fence height
• Post construction
• Gate quantity and design
• Existing fence demolition
• Haul-off
• Grade
• Property access
• Landscaping and structures
• Staining
• Custom trim
• Permit requirements
• HOA requirements

The Most Important Thing to Remember

Price per foot does not tell you whether two contractors are proposing the same fence.

One quote may include steel posts, tear-out, haul-off, premium cedar, custom gate framing and trim.

Another may not.

Compare the scope of construction, not just the number at the bottom.

What Determines the Cost of a Fence in Fort Worth?

A properly prepared fence proposal should start with the property.

Not an advertised package.

Not a generic online calculator.

Not somebody multiplying a Google Maps measurement by a universal price.

Several factors determine what a Fort Worth fence project actually requires.

Total Linear Footage

Linear footage is the starting point.

A home requiring 250 feet of fencing naturally uses more material than a home requiring 100 feet.

But project costs do not always increase perfectly in proportion to footage.

Every project still requires equipment, material delivery, mobilization and setup.

Meanwhile, a relatively short fence with multiple gates, difficult demolition or limited backyard access can require more labor per foot than a long straight fence line.

Fence Height

Height affects both material quantity and structural requirements.

A six-foot privacy fence and an eight-foot privacy fence are not the same project.

An eight-foot fence requires longer pickets, taller posts and additional material.

Local requirements can also change.

Fort Worth currently requires a building permit for solid fencing above seven feet and open fencing above eight feet. Front-yard fencing is also subject to additional restrictions.

That means homeowners should determine whether additional height actually solves a privacy problem before automatically choosing the tallest possible fence.

Fence Material

Material selection has a major effect on cost and appearance.

Common Fort Worth fencing options include:

• Cedar privacy fencing
• Pressure-treated wood
• Board-on-board cedar
• Horizontal wood fencing
• Ornamental iron or metal
• Chain-link
• Custom wood-and-metal combinations

The right choice depends on what the fence needs to accomplish.

A homeowner seeking backyard privacy should evaluate different options from a homeowner who wants to preserve a view.

A commercial property concerned with access control may require an entirely different system.

Cedar Privacy Fencing in Fort Worth

Cedar is one of the most popular materials for residential fencing because it provides a strong combination of:

• Privacy
• Natural appearance
• Design flexibility
• Compatibility with staining
• Customization

But the phrase “cedar fence” still doesn't tell you exactly what you're buying.

There are several ways to construct one.

Side-by-Side Cedar Privacy Fence

Side-by-side fencing places vertical pickets next to one another to create the traditional wood privacy fence appearance seen throughout Fort Worth.

It works well when homeowners want:

• A clean traditional look
• Backyard privacy
• Straightforward construction
• Good overall value

It doesn't require the additional layer of pickets used in board-on-board construction.

Board-on-Board Cedar Fence

Board-on-board fencing uses overlapping pickets to reduce direct sight lines through the fence.

That creates additional depth and requires more material.

For homeowners who prioritize maximum visual privacy and a more substantial custom appearance, board-on-board fencing can be an excellent option.

It is also a topic Rollins should continue building authority around.

Google Search Console is already showing Rollins for searches involving board-on-board fence installation, which means Google is beginning to associate the site with this service.

Horizontal Cedar Fence

Horizontal fencing creates a more contemporary architectural look.

It is especially attractive around:

• Modern homes
• Pools
• Courtyards
• Outdoor kitchens
• Contemporary landscaping
• Custom residences

However, horizontal fencing should not simply be a traditional fence turned sideways.

The framing and structural design need to account for the orientation of the boards.

For the right property, the result can be dramatically different from a standard privacy fence.

Cedar vs. Pressure-Treated Wood: Which Should You Choose?

There isn't a universal winner.

Cedar

Cedar is commonly selected when appearance, custom design and natural character are priorities.

It pairs particularly well with:

• Board-on-board construction
• Horizontal designs
• Decorative trim
• Metal posts
• Custom gates
• Professional staining

Pressure-Treated Wood

Pressure-treated lumber may make sense when budget is a larger consideration and the design does not require the same premium appearance.

The decision should account for:

• Desired appearance
• Budget
• Fence visibility
• Maintenance expectations
• Property value
• Architectural style
• Long-term plans

Don't choose material solely because one is cheaper per foot.

Choose the fence that makes sense for the property.

6-Foot vs. 8-Foot Privacy Fence in Fort Worth

More height does not automatically equal a better fence.

Before deciding between six and eight feet, determine why additional privacy is needed.

A 6-Foot Privacy Fence Often Works When

Neighboring lots sit at similar elevations.

The primary goal is normal backyard privacy.

There are no elevated neighboring decks or significant sight-line problems.

An 8-Foot Fence May Make Sense When

A neighboring property sits higher.

The house backs up to a roadway or commercial area.

An outdoor living area requires more screening.

A pool or backyard entertainment area has unusual visibility.

But Check Local Requirements First

Because Fort Worth requires a permit for solid fences above seven feet, an eight-foot privacy fence needs to be approached differently from a typical six-foot fence.

HOA rules may impose additional restrictions.

The best design solves the actual privacy problem while remaining appropriate for the property.

Are Steel Posts Worth It for a Wood Fence?

For many wood fence projects, steel posts are worth evaluating.

The pickets are what homeowners notice first.

The posts are one of the components helping the fence remain upright.

Steel posts can be integrated with cedar and other wood-fence designs while preserving the appearance homeowners want.

Factors to consider include:

• Fence height
• Soil conditions
• Post spacing
• Gate locations
• Fence design
• Appearance
• Budget

On higher-end custom projects, structural components can often be incorporated in ways that preserve a clean finished appearance.

When comparing bids, ask every contractor:

What exactly will support this fence?

That question can reveal a lot about the difference between two proposals.

How Much Does an Existing Fence Add to Replacement Cost?

Replacing a fence isn't simply installing the new one.

The existing fence may need to be:

• Dismantled
• Removed
• Loaded
• Hauled away
• Disposed of

Existing posts and concrete may also need removal.

Once demolition begins, contractors can discover conditions that were not obvious from photographs.

That could include:

• Unexpected concrete
• Roots
• Previous post locations
• Poor drainage
• Grade problems
• Underground irrigation
• Existing structures

This is why a price generated solely from aerial imagery should be treated as an initial estimate—not a final understanding of the project.

How Does Property Access Affect Fence Pricing?

Imagine two identical fences.

At the first property, material can be unloaded close to the fence line.

At the second property, every picket, post, tool and bag of material must move through a narrow side yard around landscaping and a pool.

Those aren't the same installation conditions.

Access issues can include:

• Narrow gates
• Pools
• Retaining walls
• Mature landscaping
• Steep grade
• Limited equipment access
• Adjacent structures
• Long distances from material staging
• 
  

A professional contractor should account for how the project will actually be built.

What About Underground Utilities?

Fence installation involves digging.

Texas 811 states that homeowners and excavators must contact 811 two business days before digging, excluding weekends and holidays, including for fence projects.

This matters because underground utility damage can be dangerous and expensive.

Utility locating should be part of responsible fence-project planning.

A fence isn't simply a line drawn between two corners.

What is underneath that line matters too.

Should You Use Board-on-Board Fencing?

Board-on-board is one of the strongest premium privacy-fence options for Fort Worth homeowners.

Instead of relying on pickets placed edge to edge, overlapping boards help reduce direct sight lines.

Advantages of Board-on-Board Fencing

Greater visual privacy.

More dimensional appearance.

Premium curb appeal.

Additional visual coverage as individual boards naturally move.

When Side-by-Side May Make More Sense

Board-on-board requires additional material.

For homeowners who do not need the added privacy or premium appearance, traditional side-by-side construction may provide a better balance of cost and function.

The right answer depends on what you're trying to achieve.

What Makes a Fence Look High-End?

It isn't simply spending more money.

A premium fence looks intentional.

That usually means several details work together.

Proportion

Fence height, posts, trim and gates should feel appropriate for the scale of the home.

Straight Lines and Transitions

Changes in elevation and materials should look planned rather than accidental.

Gates

A cheaply built gate can immediately undermine an otherwise attractive fence.

Post Treatment

Posts can become part of the design rather than something homeowners try to ignore.

Trim and Caps

Thoughtful finishing details can dramatically change the appearance of cedar fencing.

Stain Color

The finish should complement the home, landscaping and surrounding materials.

Material Combinations

Wood, ornamental metal and masonry can be combined when the architecture supports it.

For custom homes in Fort Worth, Southlake, Colleyville, Keller and Aledo, the fence should look like part of the property—not an item that was added afterward.

Internal link: Link custom fencing in Fort Worth to /custom-fencing-fort-worth-tx.

How Much Do Gates Affect Fence Cost?

Gates are mechanically different from stationary fence sections.

They move.

That creates additional structural requirements.

A proper gate design considers:

• Opening width
• Weight
• Post support
• Hinges
• Hardware
• Grade
• Clearance
• Frequency of use
• Pedestrian or vehicle traffic

A basic walk gate is very different from a 16-foot driveway entrance.

Automatic Driveway Gates in Fort Worth

Automatic driveway gates represent one of the highest-value opportunities on the Rollins website.

They can improve:

• Access control
• Privacy
• Security
• Convenience
• Property appearance

But automation needs to be designed as a complete system.

Swing vs. Sliding Driveway Gates

Swing Gates

Swing gates require sufficient clearance for the gate leaf to travel through its arc.

They can create a traditional estate-style entrance when the driveway and grade support them.

Sliding Gates

Sliding gates move alongside the fence line.

They can work well where swing clearance is limited, but they need adequate room beside the opening.

Automatic Gate Design Considerations

The system may need to account for:

• Gate weight
• Operator capacity
• Electrical availability
• Solar power
• Access controls
• Vehicle detection
• Safety systems
• Emergency access
• Daily traffic
• Opening speed
• Gate geometry

A gate operator should be selected around the actual gate—not the other way around.

Should You Stain a New Cedar Fence?

For eligible wood fencing, staining can improve appearance while helping reduce moisture absorption and UV exposure.

It does not make a fence indestructible.

Proper preparation still matters.

New Fence

Fresh wood may need time to dry before accepting an appropriate penetrating finish.

The correct timing depends on the condition of the material, not simply a universal number of days.

Existing Fence

Older fencing may require:

• Cleaning
• Drying
• Surface preparation
• Evaluation of previous coatings

If a fence has severe structural deterioration, staining may not be the right investment.

Sometimes replacement makes more sense.

How Much Does a Custom Fence Cost?

There is an enormous range because custom fence describes a design process—not one standardized product.

Custom projects may include:

• Cedar privacy fencing
• Board-on-board construction
• Horizontal layouts
• Steel posts
• Decorative top caps
• Trim
• Boxed posts
• Changing heights
• Ornamental metal
• Mixed wood-and-metal construction
• Walk gates
• Driveway gates
• Automation

The purpose of customization should be to solve something specific about the property.

It shouldn't simply add expensive details for the sake of calling a fence “custom.”

What Type of Fence Is Best for Fort Worth Homes?

The answer depends on the property.

For Backyard Privacy

Cedar privacy fencing, including side-by-side and board-on-board designs, is worth considering.

For Modern Architecture

Horizontal cedar or mixed-material fencing can complement contemporary homes.

For Open Views

Ornamental metal can provide separation without creating a solid wall.

For Larger Estate Properties

A combination of cedar privacy fencing, ornamental metal and custom driveway gates can address different parts of the property.

For Commercial Properties

Chain-link, ornamental metal, screening and controlled-access gates may be more appropriate depending on the facility.

Don't make one material perform a job it was never intended to perform.

What Type of Fence Is Best for Commercial Properties?

Commercial fence projects should start with operations.

Questions include:

What are we protecting?

Who needs access?

What types of vehicles enter the property?

Do we need visibility?

Do equipment or dumpsters need screening?

Are there loading areas?

Will gates be automated?

Is pedestrian access separate from vehicle access?

The answers may point toward:

• Chain-link
• Ornamental metal
• Privacy screening
• Custom gates
• Controlled vehicle access
• Mixed systems

Do You Need a Fence Permit in Fort Worth?

Fort Worth's current residential guidance states that front-yard and projected-front-yard fences generally cannot exceed four feet and must use an open-design picket style. Chain-link is prohibited in those areas.

The city also states that building permits are required for:

Solid fences above seven feet

and

Open fences above eight feet.

Properties in historic districts may require additional approval.

That means homeowners should never assume:

“My neighbor has one, so I can build the same thing.”

Different properties can have different:

• Zoning
• Easements
• Visibility requirements
• HOA restrictions
• Historic requirements
• Site conditions

Use the actual project address when researching requirements.

What About Property Lines and Easements?

An old fence does not necessarily prove the legal property line.

Before substantially changing a fence layout, homeowners may need to consider:

• Survey information
• Easements
• Utilities
• Drainage
• Alley access
• Existing improvements
• Neighboring structures

Installing a beautiful fence in the wrong location is still the wrong fence.

When boundary location is uncertain, resolve the uncertainty before permanent construction.

Why Are Some Fort Worth Fence Estimates So Much Cheaper?

Because the contractors may not actually be proposing the same fence.

Imagine these two descriptions:

Proposal A:

150 feet of cedar privacy fence.

Proposal B:

150 feet of six-foot cedar board-on-board privacy fencing with specified pickets, galvanized steel posts at defined spacing, cap and trim, two steel-framed gates, demolition, haul-off and cleanup.

Those descriptions don't contain the same amount of information.

Before comparing prices, compare:

Exact Material

What species, grade and thickness are included?

Post System

Wood?

Steel?

What spacing?

Fence Height

Exactly how tall?

Construction Style

Side-by-side?

Board-on-board?

Horizontal?

Gates

How many?

How wide?

How are they framed?

Demolition

Is existing fence removal included?

Disposal

Does the contractor haul everything away?

Staining

Included?

Optional?

Not included?

Warranty

What specifically is covered?

Cleanup

What condition will the property be left in?

The Lowest Quote Is Only the Best Deal When You're Comparing the Same Scope.

And often, you aren't.

10 Questions to Ask a Fence Contractor Before Hiring

Before approving your fence project, ask the contractor:

1. What exact material are you proposing?
2. What kind of posts will support the fence?
3. How will the posts be installed?
4. What construction style is included?
5. How will the gates be framed?
6. Is demolition and haul-off included?
7. Is staining included or separate?
8. What workmanship warranty is provided?
9. Who handles utility locating and applicable permit requirements?
10. What isn't included in this price?

A professional contractor should be able to answer those questions clearly.

Fort Worth vs. Surrounding DFW Fence Projects

Fort Worth isn't one uniform type of property, and neither is DFW.

Different communities often create different priorities.

Fort Worth

Established neighborhoods can involve mature trees, alleys, existing landscaping and older property layouts.

Newer neighborhoods may involve stricter HOA design requirements.

Southlake

Custom homes, outdoor living areas, pools and prominent street-facing design often make aesthetics and material coordination particularly important.

Colleyville

Privacy, custom cedar, ornamental metal and coordinated driveway entrances can all play a role depending on the property.

Keller

Families, pets, pools and larger backyards can create a combination of privacy and access needs.

Aledo

Larger lots and longer fence lines can make driveway entrances, changing grades and material selection particularly important.

Rollins is already receiving Google impressions for searches involving Aledo fencing, custom gates and automatic driveway gates.

How Do You Know When It's Time to Replace a Fence?

A damaged board does not automatically mean an entire fence needs replacement.

But there is a point where repeatedly addressing individual sections no longer makes sense.

Complete replacement may deserve consideration when:

• Multiple posts are failing
• Large areas are deteriorated
• The existing fence no longer provides adequate privacy
• Gates repeatedly fail because surrounding structure is unstable
• The homeowner wants a different height
• The layout no longer fits the property
• Major sections require reconstruction
• The fence no longer complements the home

Replacement also gives homeowners an opportunity to rethink the project.

Maybe the gate should move.

Maybe one section needs eight-foot screening while another does not.

Maybe steel posts make sense.

Maybe the driveway needs automation.

Maybe the fence should become part of an outdoor-living redesign.

A replacement project doesn't have to reproduce every mistake in the old fence.

What Qualifies the Best Fence Company in Fort Worth?

Just because a contractor claims they are “the best” don't mean they are.

Homeowners should evaluate objective information.

Look for:

• Proven local work
• Original project photography
• Clear proposals
• Relevant experience
• Appropriate insurance
• Strong customer reviews
• Workmanship coverage
• Professional communication
• Material knowledge
• Transparent project scope

The best contractor for your project is the company that can clearly explain what it will build, why the design fits your property and what you're paying for.

Rollins Fence Company is a family-run Fort Worth-area fence company providing residential, commercial and custom fence installation throughout qualifying DFW communities.

Rollins' work includes cedar and wood privacy fencing, board-on-board and horizontal designs, ornamental metal, chain-link, custom fencing, walk gates, automatic driveway gates and professional fence staining.

Frequently Asked Questions

About Fence Installation in Fort Worth

How much does a privacy fence cost in Fort Worth?

The price depends on total linear footage, fence height, wood species, construction style, posts, gates, demolition, site access and property conditions. Broad per-foot figures can help with initial budgeting but should not replace a property-specific proposal.

How much does a cedar fence cost in Fort Worth?

Cedar pricing varies based on fence height, side-by-side versus board-on-board construction, post type, trim, gates, stain and site conditions. Compare the actual specifications in each proposal instead of only comparing the price per foot.

Is cedar good for Fort Worth fences?

Cedar is widely used for North Texas residential fencing because of its appearance and flexibility for privacy and custom designs. Like all exterior wood, appropriate construction and ongoing care are important.

Is board-on-board better than side-by-side fencing?

Board-on-board can provide greater visual privacy and a more dimensional appearance because pickets overlap. Side-by-side fencing uses less material and remains an effective privacy solution. The better choice depends on your priorities and budget.

Can I install an 8-foot privacy fence in Fort Worth?

Fort Worth currently requires a building permit for solid fencing above seven feet, meaning an eight-foot solid privacy fence crosses the city's permit threshold. Property-specific zoning and other requirements should also be checked.

Do I need to call 811 before installing a fence?

Texas 811 states that homeowners and excavators must notify 811 two business days before digging, excluding weekends and holidays. Fence installation is specifically listed as work requiring notification.

Are steel posts worth using for a cedar fence?

They can be a strong option depending on fence design, height, soil, gates and appearance requirements. The contractor should be able to explain the proposed post system and why it fits the project.

Should I stain a cedar fence?

Staining can improve the appearance of eligible cedar fencing while helping reduce moisture absorption and UV exposure. The wood should be properly prepared and ready to accept the finish.

Does Rollins Fence Company install automatic driveway gates?

Yes. Rollins installs custom driveway gate systems for appropriate residential and commercial properties throughout Fort Worth and qualifying DFW communities.

Does Rollins Fence Company install commercial fences?

Yes. Rollins provides commercial fencing solutions for businesses and managed properties, including perimeter fencing, screening, chain-link, metal fencing and gate applications depending on project requirements.

Ready to Price Your Fort Worth Fence Project?

Online cost guides are useful for planning.

Your property determines the real project.

Rollins Fence Company can evaluate:

• Fence layout
• Linear footage
• Privacy requirements
• Fence height
• Cedar and other material options
• Board-on-board vs. side-by-side construction
• Posts
• Gates
• Existing fence removal
• Staining
• Grade
• Access
• Driveway gate requirements

You don't need every detail figured out before you contact us.

Tell us what you're trying to accomplish and where the property is located.

We'll take it from there.

Fort Worth Fenced Right.